Siemens SIMOTICS S-1FT7 - Option L03 - Increased Resistance to Vibration

Motor components and options
4.2 Options
S-1FT7 synchronous motors
Configuration Manual, 09/2018, A5E45099423B AA
89
4.2.4.4
Option L03 - Increased resistance to vibration
The 1FT7 motors are available with the option L03 "Increased resistance to vibration".
Area of application
Applications of motors with option L03 include:
● Servo presses
● Punching machines
Specification
Maximum permissible vibration acceleration
Note
The vibration acceleratio
n rates (0 peak) measured in the frequency range from 0 Hz to 1
kHz at the bearings (position of the measuring points according to DIN ISO 10816
-1) must
not exceed the values stated in the table.
Vibration acceleration
1FT7 Standard
1FT7 Compact with option L03
Horizontal/vertical
5 g*
10 g*
axial
2.5 g*
2.5 g*
* 1 g corresponds to 9.81 m/s²
Availability of option L03
Option L03 "Increased resistance to vibration" is available for the following 1FT7 order
numbers:
1FT7☐☐☐-5☐☐☐☐-0B☐☐-Z
1FT7☐☐☐-5☐☐☐☐-0L☐☐-Z
1FT7☐☐☐-5☐☐☐☐-1B☐☐-Z
1FT7☐☐☐-5☐☐☐☐-1L☐☐-Z
1FT7☐☐☐-5☐☐☐☐-2B☐☐-Z
1FT7☐☐☐-5☐☐☐☐-2L☐☐-Z
1FT7☐☐☐-5☐☐☐☐-3B☐☐-Z
1FT7☐☐☐-5☐☐☐☐-3L☐☐-Z
1FT7☐☐☐-5☐☐☐☐-4B☐☐-Z
1FT7☐☐☐-5☐☐☐☐-4L☐☐-Z
1FT7☐☐☐-5☐☐☐☐-0C☐☐-Z
1FT7☐☐☐-5☐☐☐☐-0M☐☐-Z
1FT7☐☐☐-5☐☐☐☐-1C☐☐-Z
1FT7☐☐☐-5☐☐☐☐-1M☐☐-Z
1FT7☐☐☐-5☐☐☐☐-2C☐☐-Z
1FT7☐☐☐-5☐☐☐☐-2M☐☐-Z
1FT7☐☐☐-5☐☐☐☐-3C☐☐-Z
1FT7☐☐☐-5☐☐☐☐-3M☐☐-Z
1FT7☐☐☐-5☐☐☐☐-4C☐☐-Z
1FT7☐☐☐-5☐☐☐☐-4M☐☐-Z
1FT7☐☐☐-5☐☐☐☐-0K☐☐-Z
1FT7☐☐☐-5☐☐☐☐-0N☐☐-Z
1FT7☐☐☐-5☐☐☐☐-1K☐☐-Z
1FT7☐☐☐-5☐☐☐☐-1N☐☐-Z
1FT7☐☐☐-5☐☐☐☐-2K☐☐-Z
1FT7☐☐☐-5☐☐☐☐-2N☐☐-Z
1FT7☐☐☐-5☐☐☐☐-3K☐☐-Z
1FT7☐☐☐-5☐☐☐☐-3N☐☐-Z
1FT7☐☐☐-5☐☐☐☐-4K☐☐-Z
1FT7☐☐☐-5☐☐☐☐-4N☐☐-Z