Siemens SIMOTICS S-1FT7 User Manual

Mechanical properties
3.1 Cooling
S-1FT7 synchronous motors
Configuration Manual, 09/2018, A5E45099423B AA
43
The following recommendation applies in order to achieve an optimum motor heatsink
(enclosure) service life:
● Use a closed cooling circuit with stainless steel cooling unit. The heat is dissipated via a
water-water heat exchanger.
● Use ABS, stainless steel, or general construction steel for all other components, such as
pipes and fittings.
Cooling system manufacturers
ait-deutschland GmbH
www.kkt-chillers.com
B
KW Kälte-Wärme-Versorgungstechnik GmbH
www.bkw
-kuema.de
DELTATHERM Hirmer GmbH
www.deltatherm.de
Glen Dimplex Deutschland GmbH
www.riedel-cooling.com
Helmut Schimpke und Team Industriekühlanlagen
GmbH + Co. KG
www.schimpke.org
Hydac System GmbH
www.hyd
ac.com
Hyfra Industriekühlanlagen GmbH
www.hyfra.de
Pfannenberg GmbH
www.pfannenberg.com
Note
Other manufacturers
You can also use equivalent products from other manufacturers.
Responsibility for the properties of third
-party products resides with the plant manufacturer.

Siemens SIMOTICS S-1FT7 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FT7
Category	Engine
Language	English