Interfaces
3.6 Onboard measuring system interface (C230-2, C240)
SIMOTION C
Operating Instructions, 02/2012
59
Right-justified profile
The most significant data bit is transmitted by the encoder with the first cycle. The configured
data width is monitored by the encoder driver depending on the configured message length.
The maximum encoder pulses per revolution is monitored depending on the data width
configured.
Configuration data:
Message length: 13/21/25 cycles can be selected
Encoder pulses per
revolution:
≤ 2
(Data width)
Data width: ≤ message length
To Next Page
Loading...
