Siemens SINAMICS G120P - Table 1- 1 Explanation of Power Module Rating Label Information; Figure 1-1 Typical Power Module Rating Labels

Introduction
1.1 System overview of the SINAMICS G120P
Power Module PM230 IP55
10 Hardware Installation Manual, 2010-07-02, A5E02923635A AB
Intelligent Operator Panel
The Intelligent Operator Panel (IOP) has been designed to enhance the interface and
communications capabilities of the SINAMICS G120P Inverters.
Rating label information
Every Power Module has a rating label which details the specifications of the Power Module.
The specifications shown on the rating label can vary due to the requirements of specific
regulations and compliance standards imposed by the country of origin and the final
destination of the product.
Detailed below is an explanation of all the information that might appear on a typical rating
label of a Power Module.
SINAMICS Power Module 230
Input: 3AC 380 - 480V 31.5A 50/60Hz
Motor: IEC 7.5kW (11kW LO) NEMA 10hp (15hp LO)
Protection: IP55 Weight: 7.0Kg Temp Range: 0 - 50°C
Serial No : XAT812-001298
MLFB : 6SL3224-0BE27-5UA0 Axx
Output: 3AC 0 - Input V In = 26A
SINAMICS Power Module 230
Input: 3AC 380 - 480 V 129A 50/60Hz
Made in EU (Germany)
Serial No : T-X90212000011
6SL3224-0BE27-5UA0 Bxx
Output: 3AC 0 - Input V In = 110A
1
1
2
2
3
3
4
4
5
5
6
6
7
8
9
10
11
12
14
14
13
13
15
15
Figure 1-1 Typical Power Module rating labels
Table 1- 1 Explanation of Power Module rating label information
Item Description Notes
1 Product name
2 Input voltage range
3 Rated input current
4 Nominal input frequency