EasyManua.ls Logo

Siemens SINAMICS PERFECT HARMONY GH150 - 4.3.7 Transporting transportation units packed in boxes

Siemens SINAMICS PERFECT HARMONY GH150
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.3.7 Transporting transportation units packed in boxes
Transportation with the fork-lift truck
WARNING
Danger when a transport unit/device tips over
If the forks are too short, this can cause the transportation unit/the device to tip over resulting
in death, serious injury, or damage inside the cabinet.
The forks of the truck must protrude at the rear of the transportation unit.
Only use forklifts approved for the purpose of transporting the devices.
Transportation with the crane
WARNING
Danger due to falling transport unit/cabinet
If the lifting gear or load suspension devices were to fail, the transportation unit/the cabinet
could fall. Death, serious injury, or material damage can result.
Do not stand underneath or near to a raised load.
To protect the boxes against pressure, use sufficiently long rope and a spreader beam. Please
proceed as follows:
1. Attach the rope/cable to the pallet as shown in the following diagram.
2. Attach the rope/cable to the spreader beam and the crane hook.
Preparations for use
4.3 Transport
SINAMICS PERFECT HARMONY GH150 6SL3825
Operating Instructions 05/2020 53

Table of Contents

Other manuals for Siemens SINAMICS PERFECT HARMONY GH150

Related product manuals