Damage caused by foreign bodies
If foreign bodies are left in the device after installation and maintenance work, this can cause
damage when the device is switched on.
● Before switching on, check as to whether there are any foreign bodies in the device.
Remove any foreign bodies.
Damage caused by incorrectly opening the doors
You can damage the locking mechanism if you open the doors incorrectly.
● Open the doors as described in Section "Preparing for use".
See also
Opening the device (Page 94)
Overheating caused by closed water valves
If the water valves are closed, when operational the drive can overheat. This can damage the
components.
● Open all of the water valves after installing the drive.
5.2 Tools required
You require the following tools for mounting and installation:
● Wrench or socket wrench, width across the flats 10, 13, 16/17, 18/19
● Allen key, size 8
● Torque wrench up to 50 Nm
● Screwdriver, size 2
● Torx T20 and T30 screwdrivers
Assembly
5.2 Tools required
SINAMICS PERFECT HARMONY GH150 6SL3825
62 Operating Instructions 05/2020
To Next Page
Loading...
