Route the interface cables ② through the openings ①. Connect the cabinet interface sockets
using cables as shown in the circuit diagram. Route the fiber-optic cable carefully without
kinking the cable.
Detailed information is provided in the converter circuit diagram.
Figure 5-3 Example: Connecting the interface cable
5.6 Connecting the water circuits
CAUTION
Eye and skin injuries caused by deionized water
Deionized water is harmful to eyes and skin and can damage surfaces.
● Therefore, use appropriate protective clothing for all work on the drive. However, if your
eyes or skin do come into contact with deionized water, rinse the affected area thoroughly
with tap water as soon as possible.
● If deionized water leaks out, eliminate the source of the problem and remove the liquid from
the surfaces affected.
Assembly
5.6 Connecting the water circuits
SINAMICS PERFECT HARMONY GH150 6SL3825
66 Operating Instructions 05/2020
To Next Page
Loading...
