Siemens SINAMICS SM120 - Removing the Double Submodule, Steps 8 to 10; Image; Removing the Double Submodule, Step 11

11.Remove the gating unit by withdrawing it to the front.
Image 9-7 Removing the double submodule, steps 8 to 10
12.Remove the screws ⑩ (M4 x 10). Withdraw the plate towards the front.
Image 9-8 Removing the double submodule, step 11
Maintenance
9.7 Repair
SINAMICS SM120 6SL38855?B
Operating Instructions 12/2015 111