WARNING
Exceeding the permitted short-circuit currents
Serious follow-on faults are possible, if the specified short-circuit current values are exceeded.
This can result in death, serious injury or material damage.
Observe the maximum permitted short-circuit currents and maximum specified short-circuit
times.
NOTICE
Incorrect parameterization
The drive may malfunction if you change the parameters.
Do not change the parameters, e.g. for the motor circuit-breaker.
Note
To complement these operating instructions, the List Manual contains an overview of all
parameters as well as a selection of function diagrams to describe the operating principle.
Only trained personnel may operate the drive.
8.2 Functions
Note
List manual
References to functions, function plans, and parameters are found in the list manual for the
drive.
8.2.1 Monitoring functions and protective functions
The drive features hardware and software functions that protect it against faults and damage
caused by impermissible operating statuses or hardware malfunctions. The monitoring
elements provide internal microprocessor-controlled monitoring and remote device monitoring.
Operation
8.2 Functions
SINAMICS SM120 6SL38855?B
88 Operating Instructions 12/2015
To Next Page
Loading...
