SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012
357
Note
Repair and replacement of equipment
Any defective parts or com
ponents must be replaced using parts contained in the relevant
lists of spare parts or options.
Disconnect the power supply before opening the equipment for access.
B.1 Options
For more information about recommended cable cross-sections and screw tightening
torques, see the table "Recommended cable cross-sections and screw tightening torques" in
Section "Terminal description (Page 40)".
er to gain access to the expansion port to fit the Parameter Loader or Bop Interface
Module, remove the detachable transparent cover gently
using just finger pressure. It is
recommended to keep the cover in a safe place and refit it when the expansion port
is not in
B.1.1 Parameter Loader
Article number: 6SL3255-0VE00-0UA1
To Next Page
Loading...
