Overview
© Siemens AG 2002 All Rights Reserved 6NH7811-0AA22
MD2 Modem (07/2002) 1-5
1.4 Standard Cables
The following standard cables are available for the RS232 and RS485 interfaces.
Table 1-2 Standard cable for the MD2 modem
Order no. Description Diagram
6NH7701-4AL Cable for connecting the MD2 modem (RS232)
with a TIM3V/TIM4 (RS232) or an other
terminal (DTE) with an identically configured 9-
pin RS232 interface.
Cable length 1.5 m
6NH7701-4DL Cable for connecting the MD2 modem (RS485)
with a TIM3V/TIM4 (RS485) or an other
terminal (DTE) with an identically configured 9-
pin RS485 interface.
Cable length 1.5 m
6NH7701-1CB Cable for connecting two MD2 modems
(RS232) to form a repeater.
Cable length 0.3 m
6NH1701-7AN Cable for connecting the MD2 modem (RS232)
with a TIM11 (RS232) or an other terminal
(DTE) with an identically configured 25-pin
RS232 interface (socket) and slide lock.
Cable length 2.5 m
6NH1701-7BK Cable for connecting the MD2 modem (RS232)
with a TIM011B (RS232) or an other terminal
(DTE) with an identically configured 25-pin
RS232 interface (socket) and screw lock.
Cable length 1.0 m
Tables 2-5 to 2-9 in Chapter 2, Mounting and Installation, show the configuration of
the cables listed above.
To Next Page
Loading...
