Services, Diagnosis and Data Saving
SINUMERIK 801 5-9
Start-Up
OEM Value Data Definition Unit
X-axis Z-axis Spin.
[0] parameter set No.)[0]
31060
[1]
Numerator load gearbox (control
parameter set No.)[1]
-
31100 Steps for monitoring rotation IPR
31110 Step tolerance for monitoring
rotation
I
31350 Stepping rate at maximum velocity Hz
31400 Steps per stepping motor revolution IPR
32000 Maximum axis velocity mm/Min
rpm
32010 Rapid traverse in jog mode mm/Min
rpm
32020 Jog axis velocity mm/Min
rpm
32100 Traversing direction (not control
direction)
-
32110 Sign actual value (control direction) -
32200
[0]
Servo gain factor (control
parameter set no.)
1000/mi
n
32200
[1]
Servo gain factor (control
parameter set no.)
1000/mi
n
32260 Rated motor speed (setpoint
branch)
rpm
32300 Axis acceleration m/s
2
32450 Backlash mm
32700
*
Interpolatory compensation
(encoder no.)
-
34000 Axis with reference point cam -
34010 Approach reference point in minus
direction
-
34020 Reference point approach velocity mm/Min
34040 Creep speed (encoder no.) mm/Min
34060 Maximum distance to reference
mark
mm/Min
34070 Reference point positioning velocity mm/Min
34080 Reference point distance
34100 Reference point value/irrelevant for
distance-coded system
mm
35110 Maximum speed for gear change rpm
To Next Page
Loading...
