Special feature regarding the associated toggle field
Requirements:
● An associated toggle field is configured for a variable,
● For the variable, a distance is configured between the input/output field and unit field and/
or a width for the unit field, and
● The variable has no unit text.
In this particular case, the associated toggle field is positioned at the configured position of the
unit field of the variable.
A position possibly configured for the input/output component of the associated toggle field is
ignored.
Example
In the following example, the associated toggle field F_Unit is automatically set with a distance
of 7 pixels to the input/output field of variable VarF , and with a width of 59 pixels .
DEF VarF=(R//0.0/,"F",,,////0,,24/39,,85,,7,59///"F_Unit"), F_Unit =
(I/*3="mm/min", 1="mm/U"/3// ////181,,155)
See also
Variable parameters (Page 92)
Variables
5.14 Details on the position of the short text, position of the input/output field
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1 105
To Next Page
Loading...
Need help?
General
