Siemens SINUMERIK 804D sl Commissioning Manual

3.5 Updating the software
3.5.1 This is how you update the firmware
Firmware Update
When service is required, it may be necessary for a service technician to install a BIOS update.
Siemens provides the corresponding update file. Possible formats include: *.img or *.rom or
*.bin. Or, the update file is already supplied on the service system, then step 1 is eliminated.
Procedure:
1. Copy the update file to the FAT partition of the service system.
2. Connect the service system to interface X125 or X135 of the NCU.
3. Switch on the system.
4. In the main menu, select the menu item "Firmware Update".
The following menu is displayed:
Figure 3-11 Firmware update
Service and diagnostics
3.5 Updating the software
NCU operating system
84 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 804D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 804D sl
Category	Control Systems
Language	English