Siemens SINUMERIK 804D sl Commissioning Manual

Configuring the system
2.3 Customized settings during boot up
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
55
2.3
Customized settings during boot up
Overview
Regarding the settings and functionality, booting followed by the start of an HMI program
starting differs from booting with subsequent start of the Service Desktop.
2.3.1
Configuring key filters for an HMI program
Filtering keys
During boot up of an HMI program, keystroke sequences and pressed function keys are
simultaneously filtered. The keystroke sequences and functions that were pressed
simultaneously and are to be filtered are configured in file E:\Windows\System.ini.
Filtering keystroke sequences:
Section:
MMC103Keyb
Key:
SeqAct
Value: <bit mask>
(= keystroke sequences to be filtered, specified in accordance with the comment
in E:\Windows\System.ini)
Init value:
262143
Filtering function keys that were pressed simultaneously:
Section:
MMC103Keyb
Key:
ConcurrentKeyMask
Value: <bit mask>
(= function keys to be filtered, specified in accordance with the comment in
E:\Windows\System.ini)
Init value:
255
In the ServiceCenter Users, the keys that are to be filtered can be configured for each
specific user:
● while the system boots → "Startup (2)" tab
● while the HMI program runs: → "HMI" tab
● on the Service Desktop or Windows Desktop: → "Desktop (2)" tab

Siemens SINUMERIK 804D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 804D sl
Category	Control Systems
Language	English