Siemens SINUMERIK 810D Programming Manual

Tables
15.1 List of statements
Job planning
Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
15-7
COUPONC
Transfer activation of ELG
assembly/synchronized spindle pair with
previous programing
COUPONC(FS,LS)
COUPRES Reset ELG group
(couple reset)
Programmed
values invalid;
machine data
values valid
COUPRES(FS,LS)
CP Path movement (continuous path) m 49
CPRECOF
1,6
Programmable contour precision OFF m 39
CPRECON
6
Programmable contour precision ON m 39
CPROT Channel-specific protection zone ON/OFF
CPROTDEF Channel specific protection area definition
CR Circle radius Real, w/o
signs
S
CROT Rotation of the current
coordinate system.
FRAME Max.
parameter
count: 6
CROTS Programmable frame rotations with solid
angles
(rotations in the indicated axes)
CROT X... Y...
CROT Z... X...
CROT Y... Z...
CROT RPL=
;separate block
S
CSCALE Scale factor for multiple axes. FRAME Max.
parameter
count:
2 * axis
count
max
CSPLINE Cubic spline m 1
CT Circle with tangential transition CT X... Y.... Z... m 1
CTAB Define following axis position
according to leading axis
position from curve table
Real If parameter
4/5 not
programmed:
Standard
scaling
CTABDEF Table definition ON
CTABDEL Clear curve table
CTABEND Table definition OFF
CTABEXISTS Checks the curve table with number n Parameter n
CTABFNO Number of curve tables still possible in the
memory
memType
CTABFPOL Number of polynomials still possible in the
memory
memType
CTABFSEG Number of curve segments still possible in the
memory
memType
CTABID Returns table number of the nth curve table parameter n
and memType

Siemens SINUMERIK 810D Specifications

General

Brand	Siemens
Model	SINUMERIK 810D
Category	Control Unit
Language	English