Siemens SINUMERIK 810D - Page 626

Tables
15.1 List of statements
Job planning
15-22 Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
LOOP
Introduction of an endless loop Structure: LOOP-
ENDLOOP
M... Switching operations 0, ..., 9999
9999
Up to 5
unassigned
M functions can
be assigned by
the machine
manufacturer
M0
10
Programmed stop
M1
10
Optional stop
M2
10
End of main program with return to
beginning of program
M3 Direction of spindle rotation clockwise for
master spindle
M4 Direction of spindle rotation
counterclockwise for master spindle
M5 Spindle stop for master spindle
M6 Tool change
M17
10
Subroutine end
M19 Spindle positions
M30
10
End of program, same effect as M2
M40 Automatic gear change
M41... M45 Gear stage 1, ..., 5
M70 Transition to axis mode
MASLDEF Define master/slave axis grouping
MASLDEL Uncouple master/slave axis grouping and
clear grouping definition
MASLOF Disable a temporary coupling
MASLOFS Deactivate a temporary coupling with
automatic slave axis stop
MASLON Enable a temporary coupling
MCALL Modal subroutine call Without
subroutine name:
Deselection
MEAC Continuous measurement
without deleting distance-to-go
Integer,
w/o signs
S
MEAFRAME Frame calculation from
measuring points
FRAME
MEAS Measure with touch-trigger
probe
Integer,
w/o signs
S
MEASA Measurement with deletion of
distance-to-go
s
MEAW Measure with touch-trigger
probe without deleting
distance-to-go
Integer,
w/o signs
S
MEAWA Measurement without deletion
of distance-to-go
s
MI Access to frame data: Mirroring