Tables
15.1 List of statements
Job planning
Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
15-27
PRESETON
Sets the actual value for programmed axes One axis
identifier is
programmed at a
time, with its
respective value
in the next
parameter.
Up to 8 axes
possible
PRESETON(X,10,Y,4.5)
PRIO Keyword for setting the priority for interrupt
processing
PROC First instruction in a program Block number - PROC -
identifier
PTP point to point; point to point motion m 49
PUTFTOC Tool offset fine for parallel dressing
(continuous dressing)
Channel numbers
1-10 or $MC
_CHAN_NAME
PUTFTOC(1,1,2) or
PUTFTOC(CH_X, CH_Y)
PUTFTOCF PutFineToolCorrectionFunctionDependent:
Fine tool correction depending on a
function defined by FCtDEF for continuous
dressing
Channel numbers
1-10 or $MC
_CHAN_NAME
PUTFTOCF(1,1,2) or
PUTFTOCF(CH_name)
PW Point weight Real, w/o
signs
S
QECLRNOF Quadrant error compensation learning OFF
QECLRNON Quadrant error compensation learning ON
QU Fast additional (auxiliary) function output
To Next Page
Loading...
