3.2 Assembly of the SINUMERIK 810D
3-41
Copyright © Siemens AG 2006
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
The metal sheet is mounted on the 3-axis CCU box with the 3 screws on the
underside (2-axis CCU box, see figure Mounting the shielding plate). The shiel-
ding plate is supplied in the box. The tube clip for connecting the shield is con-
tained in the scope of supply of the ready-assembled SIEMENS motor cable.
480
443
150
10025
466
Additional connection option
for shield connection M5x10
The tightening
torque must be
complied with
when mounting
modules!!
M3: 0.8 Nm
M4 : 1.8 Nm
M5 : 3 Nm
M6 : 6 Nm
100
Cooling
clearance
100 mm
Shielding plate
100
Cooling clearance 100 mm
130
288
Equipotential bonding terminal
120
A3 A2 A1
Motor connection
Fig. 3-4 Dimension drawing of the 3-axis CCU box
Mounting the
shielding plate
3 Desi
To Next Page
Loading...
