Siemens SINUMERIK 810DE powerline User Manual

4.6 PLC module
4-75
Copyright © Siemens AG 2006
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
For use as FSD power module (A1 – A2)
t
I
0.2 s
10 s
I
max
I
n
I
max
= Peak current
I
n
= Rated current
Fig. 4-16 Peak current duty cycle with previous load for FSD
t
I
I
max
I
n
4 s
10 s
I
max
= Peak current
I
n
= Rated current
Fig. 4-17 Peak current duty cycle without previous load for FSD
References: /PJU/, Configuration Manual Converters
4.6 PLC module
The PLC module represents a PLC-CPU that is compatible with the S7-300
product range. Via the PK bus X111, three external chains with eight S7-300 I/O
modules each can be connected. It is also possible to connect up three single
I/O modules. Mixing IM 361s and single I/O modules is permissible.
Permissible duty
cycles FSD
PLC module
4 Descri
p
tion of the SINUMERIK 810D

Siemens SINUMERIK 810DE powerline Specifications

General

Brand	Siemens
Model	SINUMERIK 810DE powerline
Category	Controller
Language	English