Siemens SIPART DR20 User Manual

SIPART DR20 Project Planning Manual
2.2 Operation and Display Functions
1 Negative deviation display
2 Replaceable label
3.1 LED for alarm A1
3.2 LED for alarm A2
4 Digital display for w-x-A2-A1 and for
parameters and configurations
5.1 Manipulated variable adjustment in
manual mode in direction of 0 % display
5.2 Manipulated variable adjustment in manual
mode in direction of 100 % display
6 Digital display of manipulated variable
from - 9 to + 109 %
7.1 Point lights up in S controllers when - ∆y is
switched through
7.2 Point lights up in S controllers when + ∆y is
switched through
8 Selector for digital display 4, for activation
of parameterization/configuring and for
lamp test
9.1 LED lights up if w is output in display 4
9.2 LED lights up if x is output in display 4
10 Selector for manual/automatic mode
11 LED lights up in manual mode, flashes
with remote intervention (N, Si, Bl)
12.1 Pushbutton to increase the local setpoint
12.2 Pushbutton to decrease the local setpoint
13 Selector for local/remote setpoint
14 LED lights up with local setpoint,
flashes with certain SPC and DDC
operating states
15 Cover for scale replacement
Fig. 2/1 Front view
11

Siemens SIPART DR20 Specifications

General

Brand	Siemens
Model	SIPART DR20
Category	Controller
Language	English