Siemens SIPART DR20 User Manual

Project Planning Manual SIPART DR20
4. Technical Data
1)
General data:
Mounting position
Permissible ambient temperature
Operation
Transport and storage
Humidity class
Degree of protection
Front
Housing
Connections (when plugged in)
Safety measures
Interference emission
Interference immunity
CE mark
Max. weight, equipped
Color Front module frame
Front surface
Dimensions and panel cut-outs
Any
0 to 50 °C
- 25 to + 75 °C
F to DIN 40040
IP 64 to DIN 40050
IP 30 to DIN 40050
IP 20 to DIN 40050
To DIN / VDE 0411 Part 1 (October 73) with
consideration of:
IEC 66E (Sec. 22) and DIN / VDE 0411 Part 100
(draft August 86)
- Protection class I to IEC 536
- Isolation between main connection and field
signals by means of protective screen or
increased insulation to DIN / VDE 106 Part 101
(Nov. 86) (IEC 536)
- The outputs are small function voltages to DIN
/ VDE 0100 Part 410 (Nov. 83)
(IEC 364-4-41)
- Clearances and creepage paths, if not
specifically stated otherwise, for over- voltage
class III and contamination class 2 to DIN /
VDE 0109 (Dec. 83) (IEC 664 and IEC 664A)
- Isolation between ± ∆y contacts of the S-
controller and the field signals by means of
protective screen or increased insulation to DIN
/ VDE 0106 Part 101 (Nov. 86) (IEC 536) for
overvoltage class II and contamination class 2
to DIN / VDE 0109 (Dec. 83) (IEC 664 and IEC
664A).
according to EN 50081-2
according to EN 50082-2,
NAMUR NE21 May 1993
conforms to EMC regulation 89/336/EEC
LV regulation 72/73/EEC
Approx. 1.2 kg
RAL 7037
RAL 7035
See Figs. 4/1 and 4/2
1)
From hardware version 2 of the controller onwards
(yellow sticker on the rear of the controller or marking on the name plate)
62

Siemens SIPART DR20 Specifications

General

Brand	Siemens
Model	SIPART DR20
Category	Controller
Language	English