SIPART DR20 Project Planning Manual
SIPART DR20
Project Planning Manual
This edition 1990 of the Project Planning Manual describes the SIPART DR20 compact
controller in the design with software version A09 (see page 91). This device can be used
to implement all functions which have already been described in earlier documents. A
number of function extensions have been made compared to earlier devices; these are
especially identified.
Notice
The controller SIPART DR20 is powered by electricity. Certain components within electrical
instruments are by necessity subject to very high voltages. Serious physical injury or damage to
property / equipment may ensue if the hints in this manual are ignored. Only suitable qualified
personnel should use this controller. The trouble-free and safe operation depends on proper
transport, professional storage, as well as careful operation and maintenance.
Subject to change
SIPART, TELEPERM, SIMATIC and COROS are registered trade marks
of the Siemens Aktiengesellschaft
3
To Next Page
Loading...
Need help?
General
