Siemens SIREMOBIL Compact L - Preparation for Installation; Installing the New Lifting Column

3 - 1
Siemens AG n.a. SPR2-130.841.02 Page 1 of 10 SIREMOBIL Compact L
Medical Solutions Rev. 01 07.05 CS PS 24 System Manual
Preparation for installation 3
• Recut the thread (1/Fig. 1).
• Eject all leads of the four-pin plug on the connection cable and insert them in the three-
pin plug as follows:
• Remove the black plastic cover from the lifting column (1/Fig. 2).
Installing the new lifting column 3
• Two persons are required to insert the new lifting column through the opening in the
chassis; pay attention to the connection cable.
• Set the lifting column in the guide (1/Fig. 1) and screw it tight from the bottom of the unit
(torque 40 Nm).
Fig. 1 Fig. 2
X7A/1 X7A/2 X7A/3
1
1
Installing the lifting column 3