Siemens SIREMOBIL Iso-C

12 General Information
SIREMOBIL Iso-C SPR2-230.101.02.06.02 Siemens AG
07.05 CS PS 24
Page 12 of 46
Medical Solutions
1.6 Safety information and protective measures
1.6.1 General safety information (in existing documents)
WARNING
Danger of injuries, death or material damage.
Note
¹ the product-specific safety notes in these instructions,
¹ the general safety information in TD00-000.860.01... and
¹ the safety information in accordance with ARTD part 2.
¹ Non-compliance can lead to death, injury or material
damage.
1.6.2 General electrical safety information
WARNING
Electrical safety!
Non-compliance can lead to severe injury or even death and mate-
rial damage.
¹ After opening the cover panels, the parts under voltage
are accessible. To avoid danger, disconnect the system
from the power supply prior to opening the covers. Pull
out the power supply plug.
¹ If an uninterruptible power supply (UPS) is installed in
the system, the voltage output of the UPS must also be
deenergized or the voltage output plug must be discon-
nected.
¹ If work has to be performed under electrical voltage, the
general safety information according to
TD00-000.860.01... must be complied with.
CAUTION
Electrical voltage!
Non-compliance can result in material damage.
¹ When working on the system, ESD regulations must be
observed.