Siemens SIREMOBIL Iso-C Maintenance Instruction

6 General Information
SIREMOBIL Iso-C SPR2-230.101.02.06.02 Siemens AG
07.05 CS PS 24
Page 6 of 46
Medical Solutions
1.2 Required documents
* Within the purview of DIN VDE 0751-1, we recommend documenting the results of the
maintenance both in the maintenance protocol and in the TSC protocol. The protocols
should be filled out completely and handed over to the client after maintenance is com-
plete.
1.2.1 Systems equipped with SIMOMED N X 2080 monitor
1.2.2 Systems equipped with the standard 100/120Hz monitor
1.2.3 Systems equipped with TFT displays
• Replacement instructions of the TFT display available.
1.2.4 Systems equipped with an I.I. laser light localizer
1.2.5 Systems equipped with a laser light localizer
• Safety information according to ARTD, part 2
• Service protocol SPR2-230.105.02..
• Service instructions SPR2-230.061.01..
• Image quality quick test SPR2-230.037.01..
• Technical Safety Checks - Protocol* SP00-000.834.01...
• Maintenance check list Z35
• Adjustment Instructions RX52-060.061.02..
• Maintenance instructions (SPR2-230.101.01 / Mon-
itor 44 cm, 100/120 Hz)
• Service protocol (SPR2-230.105.01 / Mon-
itor 44cm, 100/120HZ)
• Installation and Setting Instructions RXR2-130.033.03
• Setting Instructions SPR2-230.032.01..

Siemens SIREMOBIL Iso-C Specifications

General

Brand	Siemens
Model	SIREMOBIL Iso-C
Category	Medical Equipment
Language	English