Siemens SIREMOBIL Iso-C Maintenance Instruction

8 General Information
SIREMOBIL Iso-C SPR2-230.101.02.06.02 Siemens AG
07.05 CS PS 24
Page 8 of 46
Medical Solutions
1.3 Required tools, measurement and auxiliary devices
NOTE
The indicated items are listed in the STC (Service Tools Catalog)
unless otherwise stated (the STC is a component of the Spare
Parts Catalog) with the exception of items marked with "*".
Tool For example Material no.:
• Standard tool kit*
• Set of Allen wrenches*
• Spring balance rated for up to 200
N
44 15 113 RH090
• Leakage current measuring device Safety tester Unimet 1100 51 38 727
• Protective conductor meter Safety tester Unimet 1100 51 38 727
• Internal line resistance meter 84 28 104 Y4337
• DVM Fluke 187 99 94 831
• Luminance meter e.g., SPOTMETER for SMfit
ACT
77 52 848
• Densitometer (if MULTISPOT 2000
option is available)
97 02 416 Y1996
• Dose meter PTW Diados 97 17 612 Y0388
• Dynamic test kit 37 90 156 X1963
• Precision X-ray filter 99 00 598 XE999
• Set of resolution tests 28 71 820 RE999
• Set of radiation filters (10 x 0.3 mm) 44 06 120 RV090
• Set of radiation filters 97 98 596 G5321
• 25 mm AL measuring stand, type 26765 acc. to DIN 6868 Part 50*
or
1.2 mm Cu (e.g., from set of radiation filters 44 06 120) plus
• 17 Micrometer Cu strip 11 67 662
• Centering cross (only with Diamen-
tor)
96 60 051 RE999
• Calibration phantom (if 3D recon-
struction option is available)
75 51 620 G5486
• Service PC
• Cable for connecting service PC to
host
99 00 440 RE999

Siemens SIREMOBIL Iso-C Specifications

General

Brand	Siemens
Model	SIREMOBIL Iso-C
Category	Medical Equipment
Language	English