22 General Information
SIREMOBIL Iso-C SPR2-230.101.02.06.02 Siemens AG
07.05 CS PS 24
Page 22 of 46
Medical Solutions
1.10 Technical Safety Checks (TSC)
Abbreviation: TSC = Technical Safety Checks
NOTE
• Within the purview of DIN VDE 0751-1, the operator of medical
engineering products has to perform technical safety checks at
regular intervals.
• The checks listed in these maintenance instructions contain all
technical safety checks according to DIN VDE 0751-1 except for
the check of the completeness, presence and legibility of the
necessary operator documents.
• A separate report with print number SP00.000.834.01... is avail-
able for each technical safety check.
• Within the purview of DIN VDE 0751-1, we recommend docu-
menting the maintenance results both in the maintenance re-
port and in the TSC report. The reports should be filled out
completely and handed over to the client after maintenance is
complete.
• The table below assigns each technical safety check listed in
document SP00.000.834.01... to the corresponding mainte-
nance work.
Technical safety checks, test certificate
of the check
Maintenance instructions for the
check/comments
1 Identification data Please fill in the fields.
2 General checks n.a.
2.1 Visual inspection: Is there any damage
affecting safety?
3. Mechanical safety, checks:
SIM Covers
SIM Cable deflectors
SIM Foot brake
SIM Brakes
SIM C-arm
Emergency Stop switch
SIM Monitors/displays
2.2 Are all cables and cable guides secure
and without any visible damage?
3. Electrical safety, check:
SIE Cables and plugs
SIE Voltage discharge rubber
To Next Page
Loading...
