Siemens SIRIUS 3RW30 - Assembly Type: Standalone Assembly, Side-By-Side Assembly, Direct Mounting

Installation
8.1 Installing the soft starter
SIRIUS 3RW30 / 3RW40
Manual, 10/2018, NEB535199502000/RS-AB/005
69
8.1.4
Assembly type: Standalone assembly, side-by-side assembly, direct mounting
Standalone assembly
The term "standalone assembly" is used if the clearances a / b / c described in chapter
Mounting dimensions, clearances, and assembly type (Page 68) are complied with.
Side-by-side assembly
The term "side-by-side assembly" is used if the lateral clearance a described in chapter
Mounting dimensions, clearances, and assembly type (Page 68) are not complied with, e.g.
if several switching devices are assembled side by side.