Siemens SITRANS F M MAG 1100 - Page 57

Nominal size DN A
1)
A
1
/A
2
2)
B D
1
40 1½ 179 7.05 333 13.11 221 8.70 40 1.57
50 2 188 7.40 342 13.47 239 9.41 50 1.97
65 2½ 198 7.80 351 13.82 258 10.16 65 2.56
80 3 204 8.03 357 14.06 270 10.63 80 3.15
100 4 217 8.54 370 14.57 296 11.65 100 3.94
1)
14.5 mm shorter with AISI terminal box (Ex and high temperature version)
2)
A2 is 3 mm shorter than A1
Table 8-15 Built-in lengths
Nominal size DN L
1)
EN 1092-1-201
EPDM Graphite PTFE (Teflon) Without gasket PN 63
mm inch mm inch mm inch mm inch mm inch mm inch
15 ½ - - - - - - 200 7.9 - -
25 1 - - - - - - 200 7.9 - -
40 1½ - - - - - - 200 7.9 - -
50 2 - - - - - - 200 7.9 276 10.9
65 2½ 200 7.9 200 / - 7.9/ - - - 200 7.9 320 12.6
80 3 200 7.9 200 / - 7.9/ - - - 272 10.8 323 12.8
100 4 250 9.8 250/ - 9.8/ - - - 250 9.9 380 15.0
1)
When earthing flanges are used, the thickness of the earthing flange must be added to the built-in length
Technical data
8.10 Dimensions and weight
SITRANS F M MAG 1100 sensor
Operating Instructions, 01/2018, A5E03433301-AC 57