Siemens SITRANS F M TRANSMAG 2 - Page 38

Commissioning
6.4 Operating examples
SITRANS F M TRANSMAG 2
36 Operating Instructions, 11/2009, A5E00102775-07
12.3 m3/h
5680 m3
3. Measuring
functions
2 Totalizer forw.
1
2
Function group
1 display
3.3. Totalizer reverse
1Setreverse
Function group
2 Diagnostics
Function group
3 Measuring
functions
3. Measuring
functions
1Flow
3.1. Flow
1Engr.Unit
3.1.1 Engr. Unit
l/min
3. Measuring
functions
3 Totalizer reverse
3.4.1. Set net
Cancel
3.3.1. Setting
Cancel
3. Measuring
functions
4 Totalizer net
3.4. Totalizer net
1 Set net
3.4. Totalizer net
2Engr.Unit
3.4.2. Engr. Unit
l
3.1.1. Engr. Unit
m
3
/h
3
8
7
3x
6
5
4
Figure 6-4 Setting current flow unit
Example 2: Changing pulse rate
In the following example the pulse rate is changed from 1 pulse per liter to 200 pulses per
liter.
1. Navigate the menu and select menu item 4.2.3 "Pulse rate".
4.2 Digit.output1
3 Pulse rate
Note
See Operating Transmag 2 (Page 31) for information on how to navigate the menu.