Siemens SITRANS F M TRANSMAG 2 - Functions; Menu Structure

Commissioning
6.4 Operating examples
SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07
37
1. Enable the programming by pressing once.
The unit in the second display line flashes
4.2.3 Unit
lmp/l
1. Press
once.
Digit 1 flashes
4.2.3 Pulse rate
+1.00 lmp./Unit
1. Change the digit from 1 to 2 by pressing
once
4.2.3 Pulse rate
+2.00 lmp./Unit
1. Select the decimal point by pressing
once
4.2.3 Pulse rate
+2.00 lmp./Unit
1. Move the decimal point two places to the right by pressing the
twice
4.2.3 Pulse rate
+200.00 lmp./Unit
1. Terminate the input by pressing
three times
4.2 Digit.output1
3 Pulse rate