Installing/Mounting
4.3 Mounting the sensor
SITRANS FCS200
18 Operating Instructions, 02/2011, A5E02508199-01
/
SITRANS FCS200
/
Avoid vibrations
● Make sure that any valves or pumps upstream of the sensor do not cavitate and do not
send vibration into the sensor.
Figure 4-5 Eliminate vibrations
Avoid cross talk
If operating more than one flowmeter in one or multiple interconnected pipelines there is a
risk of cross talk.
Prevent cross talk as follows:
● Mount sensors on separate steelframes
● Keep sufficient distance between the sensors (distance depends on application)
● Decouple the pipelines.
To Next Page
Loading...
