Siemens SITRANS F - Section 1: GETTING STARTED; 1.2 IMPORTANT SAFETY CONSIDERATIONS; 1.3 ENERGY METER INSTALLATION STEPS

SITRANS FCS200
Operating Instructions, 02/2011, A5E02508199-01
37
Appendix
A
A.1 Ordering
In order to ensure that the ordering data you are using is not outdated, the latest ordering
data is always available on the Internet: Catalog process instrumentation
(http://www.siemens.com/processinstrumentation/catalogs
)
A.2 Serial number structure
The following contains a short description of the serial number structure for SITRANS
FCS200 sensors.
The serial number is structured as follows:
● PPP/YMDDxxxxxxx
where:
– PPP is the manufacturing site = HEJ
– / is a default separator
– Y signifies the year of production, according to the table below
– M signifies the month of production, according to the table below
– DD signifies the day of production (01-31)
– xxxxxxx is the running counter
Year and month of production codes
Table A- 1 Year of production codes
Calendar year Code
1)
1950, 1970, 1990, 2010 A
1951, 1971, 1991, 2011 B
1952, 1972, 1992, 2012 C
1953, 1973, 1993, 2013 D
1954, 1974, 1994, 2014 E
1955, 1975, 1995, 2015 F
1956, 1976, 1996, 2016 H (G)
2)
1957, 1977, 1997, 2017 J
1958, 1978, 1998, 2018 K
1959, 1979, 1999, 2019 L
1960, 1980, 2000, 2020 M