Siemens SITRANS F - 1 Introduction; Items Supplied; Device Identification

SITRANS FCS200
Operating Instructions, 02/2011, A5E02508199-01
5
Introduction
1
These instructions contain all the information you need for using the device.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it as well as service and
maintenance engineers.
Note
It is the responsibilit
y of the customer that the instructions and directions provided in the
operating instructions are read, understood and followed by the relevant personnel before
installing the device.
1.1 Items supplied
 SITRANS FCS200
 Sensorprom Memory unit
 Calibration certificate
 Quick Start Guide
 SITRANS F C Literature CD-ROM
1.2 Device identification
Inspection
1. Check for mechanical damage due to possible improper handling during shipment. All
claims for damage are to be made promptly to the shipper.
2. Make sure the scope of delivery, and the information on the type plate corresponds to the
ordering information