Siemens SITRANS FMT020 - Improper Device Modifications; Information for Radio Approval FCC and IC

3.1.2 Improper device modi󹪝cations
WARNING
Improper device modi󹪝cations
Risk to personnel, system, and environment can result from modi󹪝cations to the device,
particularly in hazardous areas.
• Only carry out modi󹪝cations that are described in the instructions for the device. Failure to
observe this requirement cancels the manufacturer's warranty and the product approvals.
Do not operate the device after unauthorized modi󹪝cations.
3.1.3 Information for radio approval FCC and IC
WARNING
FCC Warning
Statement 15.19(a)(3): This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause
undesired operation. Changes or modi󹪝cations not expressly approved by Dorman Products
Inc. could void the user’s authority to operate the equipment.
WARNING
IC Warning
The term IC before the Certi󹪝cation/Registration number only signi󹪝es that the Industry Canada
technical speci󹪝cations were met.
Operation is subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference including interference that may cause undesired
operation of the device.
CAUTION
Device modi󹪝cations
Changes or modi󹪝cations not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Safety notes
3.1Preconditions for use
SITRANS Veri󹪝cator
12 Operating Instructions, 03/2024, A5E51481698-AA