Siemens SITRANS FMT020 - Installing or Replacing the Battery

6. With the same type of mechanism connect the other side of the cable to the Veri󹪝cator test
unit. ④




Figure6-1 Connecting the cable
7. Reconnect power to the 󹪞owmeter.
8. Check battery charge level and install battery: Installing or replacing the battery (Page27)
9. Turn on the Veri󹪝cator test unit.
6.4 Installing or replacing the battery
Before you start
• Make sure the Veri󹪝cator test unit is turned o󹪜.
• Press the button on the battery you want to install, to check battery charge level. If needed
󹪝rst charge the battery: Charging the battery (Page28).
Connecting
6.4Installing or replacing the battery
SITRANS Veri󹪝cator
Operating Instructions, 03/2024, A5E51481698-AA 27