Siemens SITRANS FMT020 - Connecting the Cable

② Bluetooth LED
LED behavior Description
OFF Bluetooth not initialized, no communication with SITRANS mobile IQ possible
ON Bluetooth initialized, communication with SITRANS mobile IQ possible
④ Power LED
LED behavior Description
OFF Device is o󹪜
ON Device is powered on
Blinking slowly Device is shutting down
Blinking rapidly Battery has a malfunction
2 Blinks Battery power is low
3 Blinks Battery communication error
5 Blinks Hardware fault, device needs to be restarted
⑥ Status LED
LED behavior Description
OFF Device not ready
ON Device is ready
Blinking slowly Veri󹪝cation is in progress
Blinking rapidly Unrecoverable software error, restart device
6.3 Connecting the cable
Before you start
• Install the FMT020 adapter between terminal box and transmitter:
Installing the FMT020 Adapter (Page18)
• Read the safety notes:
– General safety notes (Page11)
– Basic safety notes: Installing/mounting (Page17)
– Basic safety notes: Connecting (Page23)
Connecting
6.3Connecting the cable
SITRANS Veri󹪝cator
Operating Instructions, 03/2024, A5E51481698-AA 25