Siemens SITRANS FMT020 - Verificator Test Unit and LED Behavior

NOTICE
Condensation in the device
Damage to device through formation of condensation if the temperature di󹪜erence between
transportation or storage and the mounting location exceeds 20°C (36°F).
• Before taking the device into operation, let the device adapt for several hours in the new
environment.
6.2 Overview of Veri󹪝cator test unit and LED behavior
NOTICE
Remove battery for transport
To avoid any damage to the device, remove the battery before transporting the Veri󹪝cator test
unit.




① Battery compartment
② Bluetooth LED (blue)
③ Connection cable connector
④ Power LED (red)
⑤ Power switch
⑥ Status LED (green)
Connecting
6.2Overview of Veri󹪝cator test unit and LED behavior
SITRANS Veri󹪝cator
24 Operating Instructions, 03/2024, A5E51481698-AA