Siemens SITRANS FMT020 - Operating

Introduction
2
2.1 Purpose of this documentation
These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, 󹪝rst review its principle of operation.
The instructions are aimed at persons mechanically installing, connecting and
commissioning the device, as well as service and maintenance engineers.
See also
Product documentation and support (Page47)
2.2 Document history
The following table shows major changes in the documentation compared to the previous
edition.
Edition Remark
03/2024 First edition
2.3 Product compatibility
The following table describes compatibility between manual edition, device revision,
engineering system and associated Electronic Device Description (EDD).
Manual
edition
Remarks Device revision Compatible transmitters Transmitter revision
03/2024 First edition FW: 1.13.00 or later
HW: 1.00.00 or later
Device revision 1 or later
SITRANS FMT020 FW: 1.01.05-00 or later
HW: 1.00.00 or later
2.4 Designated use
Use the device in accordance with the information on the nameplate and in the Technical
speci󹪝cations (Page45).
SITRANS Veri󹪝cator
Operating Instructions, 03/2024, A5E51481698-AA 7