Siemens SITRANS FMT020 - Reset Password; Start Verification and Generate Report

1. Start the SITRANS mobile IQ app.
The smartphone or tablet automatically searches for Bluetooth devices in the vicinity. The
devices found are listed. Select the Veri󹪝cator in the device list.
2. Enter the default delivery password "Sitrans AW050!". The delivery password must be
changed for 󹪝rst connection setup.
3. Assign a new password. Everybody authorized to connect additional mobile devices has to
know the new password.
– To avoid potential security threads: Before assigning a password, ensure that no 2 󹪝eld
devices with the same serial number are displayed in the selection list.
– Assign a new password that is not the same as the default password. The new password
must consist of at least 12 characters (of any type).
– Only use passwords with a high password strength. Avoid weak passwords for example
"password1", "123456789" or similar.
– Do not use the same password for di󹪜erent Bluetooth 󹪝eld devices.
– If the mobile end device has device protection enabled, SITRANS mobile IQ automatically
saves the password. Individually stored device passwords can be deleted in the app.
7.2 Reset Password
Procedure
1. Select "Bluetooth password reset".
2. Once you have selected "Bluetooth password reset", turn o󹪜 the Veri󹪝cator test unit within
60seconds.
3. Wait for 30seconds.
4. Turn the Veri󹪝cator test unit back on.
The password is reset to the default password.
7.3 Starting a veri󹪝cation and generating a certi󹪝cate or report
Before you start
• Download, install SITRANS mobile IQ and connect to the Veri󹪝cator: Connecting the
Veri󹪝cator with SITRANS mobile IQ App (Page31)
• Make sure you have an active license: Activating a new license (Page39)
Operating
7.3Starting a veri󹪝cation and generating a certi󹪝cate or report
SITRANS Veri󹪝cator
32 Operating Instructions, 03/2024, A5E51481698-AA