Siemens SITRANS FMT020 - Page 26

Reference





① FMT020 adapter latch
② FMT020 adapter lid
③ Battery compartment latch
④ Battery compartment lid
⑤ Connection cable connector latch
⑥ Connection cable connector lid
Procedure
1. Isolate the 󹪞owmeter from power. Turn o󹪜 the Veri󹪝cator test unit.
2. Push up the FMT020 adapter latch. ①
3. Open up the FMT020 adapter lid.
4. Connect the cable to the FMT020 adapter. ②
5. Push down the FMT020 adapter latch to lock the cable. ③
Connecting
6.3Connecting the cable
SITRANS Veri󹪝cator
26 Operating Instructions, 03/2024, A5E51481698-AA