What does it mean if device is nearing its lifetime limit according to REMINDER 1 on Siemens Transmitter?
If your Siemens Transmitter is nearing its lifetime limit according to the value set in REMINDER 1 (REQUIRED), replacement is recommended.
What does it mean if device is nearing its lifetime limit according to REMINDER 2 on Siemens SITRANS LR560?
If your Siemens Transmitter is nearing its lifetime limit according to the value set in REMINDER 2 (DEMANDED), replacement is recommended.
What does it mean if sensor is nearing its lifetime limit according to REMINDER 1 on Siemens SITRANS LR560 Transmitter?
If the sensor is nearing its lifetime limit according to the value set in REMINDER 1 (REQUIRED) on your Siemens Transmitter, replacement is recommended.
What does it mean if sensor is nearing its lifetime limit according to REMINDER 2 on Siemens SITRANS LR560?
If the sensor is nearing its lifetime limit according to the value set in REMINDER 2 (DEMANDED) on your Siemens Transmitter, replacement is recommended.
What to do if service interval defined in REMINDER 1 has expired on Siemens SITRANS LR560 Transmitter?
If the service interval as defined in REMINDER 1 (REQUIRED) has expired on your Siemens Transmitter, perform service.
What to do if service interval defined in REMINDER 2 has expired on Siemens SITRANS LR560 Transmitter?
If the service interval as defined in REMINDER 2 (DEMANDED) has expired on your Siemens Transmitter, perform service.
General| Type | Radar Level Transmitter |
|---|---|
| Frequency | 80 GHz |
| Accuracy | ± 2 mm |
| Power Supply | 10.5 to 42 V DC |
| Protection Class | IP68 |
| Housing Material | Aluminum or Stainless Steel |
| Beam Angle | 3° |
| Approvals | ATEX, IECEx, FM, CSA, SIL2 |
| Measuring Principle | FMCW Radar |
| Output Signal | 4-20 mA, HART |
| Communication Protocol | HART |
| Process Pressure | -1 to 40 bar (-14.5 to 580 psi) |
General description of the 78 GHz FMCW radar level transmitter and its benefits.
Safety precautions for hot surfaces, material compatibility, connecting parts, operating pressure, and external stresses.
Safety warnings for unsuitable cables, glands, plugs, hazardous contact voltage, and condensation.
Using a handheld programmer for device configuration, including key functions, programming, and echo profile.
Using SIMATIC PDM for commissioning and maintaining process devices, including EDD updates.
Overview of wizards for device configuration, filtering echoes, and parameter management.
General safety notes, emphasizing the device is maintenance-free but requires periodic inspection.
Safety warnings and procedures for maintenance and repair work, especially in hazardous areas.
Table of fault codes, meanings, and corrective actions for troubleshooting.
Common operating symptoms, their causes, and recommended actions for resolution.
Troubleshooting steps for communication issues and specific symptoms with corrective actions.
Explains the FMCW radar technology and signal processing for level measurement.
Details on Process Intelligence and Echo selection algorithms.
Conditions leading to unreliable measurements and fail-safe behavior.
Input to AIFB is value with status; outputs PV, SV1, SV2, with quality checks and scaling.
Software package for commissioning and maintaining SITRANS LR560 and other process devices.
General fault codes and their corrective actions, including persistence after reset.
Detailed listing of the Human Machine Interface menu structure for device configuration.
To Next Page
