Siemens SITRANS P DS III - Nameplate Layout

Description
3.2 Nameplate layout
SITRANS P DS III
20 Service Manual, 06/2014, A5E34219855-01
● The electrical terminal compartment ⑩ for the auxiliary power and shield is accessible
when you remove the back cover
⑨.
● The measuring cell with a process connection
⑥ is located in the lower section of the
enclosure. This measuring cell is secured against twisting by a retaining screw
⑤.
Thanks to the modular design of the transmitter, the measuring cell and application
electronics or connection board can be replaced if required.
● On the upper face of the enclosure you can see crosshead screws which secure the key
cover
①, under which there are 3 keys for local operation.
3.2
Nameplate layout
Nameplate with general information
The nameplate bearing the Order No. and other important information, such as design
details and technical data, is on the side of the enclosure.
①
Order number (machine-readable product
code)
②
Serial number
Figure 3-2 Example of a nameplate