Siemens SITRANS P DS III - Replacing the Measuring Cell

Maintenance and servicing
5.7 Replacing parts
SITRANS P DS III
Service Manual, 06/2014, A5E34219855-01
49
5.7.7
Replacing the measuring cell
Procedure for replacing the measuring cell
Note
When using the differential pressure cell, replace the complete measuring cell with process
flanges.
1. Isolate the device from power.
2. Remove the display. Compare section Replacing the display (Page 45).
3. Remove the application electronics. Compare section Replacing the application
electronics (Page 47).