Description
3.3 Measuring point label layout
SITRANS P DS III
Service Manual, 06/2014, A5E34219855-01
21
Nameplate with approval information
On the opposite side is the nameplate with approval information. This nameplate shows e.g.
the hardware and firmware versions. You must also observe the information in the relevant
certificate for a transmitter version for use in hazardous areas.
Characteristics for hazardous area
Maximum surface temperature
(temperature class)
Category for operating area
Figure 3-3 Example of a nameplate
Measuring point label layout
Figure 3-4 Example of measuring point label
To Next Page
Loading...
