Connecting
4.2 Connecting the device
SITRANS P DS III
28 Service Manual, 06/2014, A5E34219855-01
1. Screw the covers ④⑦ back on as far as they will go.
2. Secure each cover with the cover catch
③⑥.
3. Close the key cover
①.
4. Tighten the screws in the key cover.
5. Check the tightness of the blanking plugs
⑤ and cable gland ② in accordance with the
degree of protection.
Cover (front), optionally with inspection window
Cover (rear) for electrical terminal compartment
Safety catch for stainless steel enclosure
Figure 4-1 View of the transmitter: Left: Back right: Front view
To Next Page
Loading...
