Siemens SITRANS P DS III - Disassembly and Specific Installation Types

Maintenance and servicing
5.7 Replacing parts
SITRANS P DS III
44 Service Manual, 06/2014, A5E34219855-01
3. Remove the two splints on the pushbutton flap using flat-nose pliers.
4. Remove the pushbutton flap.
5. Use a TX10 Torx screwdriver or Phillips screwdriver to loosen the two screws of the
pushbutton insert you can now see.
6. Remove the pushbutton insert from the housing.
7. Remove the three keys with springs from the pushbutton insert.
Procedure for installing the pushbutton module
1. Work in the reverse order as described in "Procedure for replacing the pushbutton
module".
2. When inserting the new pushbutton module, make sure that the magnets of the keys
point to the front in the direction of the display.