Siemens SITRANS TH100 - Connecting the SITRANS TF Dual Chamber Housing; Opening the Device; Connecting the SITRANS TF320 Dual Chamber Housing

5.9 Connecting the SITRANS TF dual chamber housing
5.9.1
Opening the device
Procedure


① Cover of the electrical cable compartment
② Safety catch (back)
Figure 5-6 Rear view of the device
1. Use a 3-mm Allen key to loosen the safety catch (rear) ② .
2
. Unscrew the cover of the electrical cable compartment ①.
5.9.2 Connecting the SITRANS TF320 dual chamber housing
Requirement
The device is opened. (Page 60)
If you use stranded wire, you need a ferrule.
Note the maximum permissible core cross-section (Page 81).
Connecting
5.9 Connecting the SITRANS TF dual chamber housing
SITRANS TH100/TH100Slim/TH320/TH420/TR320/TR420/TF320/TF420
60 Compact Operating Instructions, 07/2021, A5E41865021-AE