Siemens SITRANS TH100 - Connecting the SITRANS TF Single Chamber Housing; Opening the Device; Connecting the SITRANS TF320 Single Chamber Housing

5.8 Connecting the SITRANS TF single chamber housing
5.8.1
Opening the device
Procedure


① Cover of the electrical cable compartment
② Safety catch
Figure 5-2 Opening device with single chamber housing
1. Use a 3 mm Allen key to loosen the safety catch ②.
2
. Unscrew the cover of the electrical cable compartment ①.
5.8.2 Connecting the SITRANS TF320 single chamber housing
Condition
The device is opened. (Page 53)
If you use stranded wire used, you need a ferrule.
Note the maximum permissible core cross-section (Page 81).
Connecting
5.8 Connecting the SITRANS TF single chamber housing
SITRANS TH100/TH100Slim/TH320/TH420/TR320/TR420/TF320/TF420
Compact Operating Instructions, 07/2021, A5E41865021-AE 53